|Function||An alternative shock-treatment based on oxygen release that doesn't release chlorine smells. It is mainly used on Spas on a weekly basis to give a boost|
of oxidising agent to kill off any bacteria that might be present.
|Pool Shock Dose||Add 500g per 10,000 gallons of pool water in 100g quantities at a time.||Chlorine/Bromine Spas||Shock weekly with Oxy Shock. Add 30g per 1,000 litres of water.||Oxy Shock treated Spas||Add 30g daily per 1,000 litres of water. Bathers can return after 30 minutes. Shock dose weekly by adding 100g per 1,000 litres of water.||Whirlpool Baths||Add 25g directly into the bath water after bathing. Run the pump for 5-6 minutes then drain to waste. For irregularly used baths add
100g before bathing and run pump for 10 minutes, drain and refill to bathe.
|Dosing Method||Fill a clean plastic container with warm water and add the required amount of Oxy Shock to the container. Stir well with a clean stirrer and then distribute evenly.||Health and Safety||Click here for a MSDS sheet for Oxy Shock.|